Recirculating Type Motorized Lubrication Unit Motorized lubrication unit are electric motor driven pumps along with reservoir, oil filter, suction staines, pressure relief valve, bleed valve etc. Suitable for single shot automatic oil lubrication, these motorised lubrication units are to be run intermittently. During motor 'ON' period (normally 5 sec.) all the metering cartridge eject out required amount of oil at various points of the machine. Request a quote

Compact Unit A pressure relief valve is incorporated in the line to safeguard the pump against overloading. The unit also incorporates a pressure switch for sensing oil pressure electrically. It also has a float switch for sensing low oil level electrically and bleed value for automatic air bleeding of the system. Request a quote

Motorised Lubrication Units On attaining the pre-set working pressure, the pressure switch gives a motor. A pressure reducing system maintains a pressure of approximately 1.0 kg/cm2, after the motor switched off. This is required for proper functioning of the distributors. After a lapse of the pre-set time, the motor restarts completing the cycle. An air bleed valve is incorporated in the system to release entrapped air. A level switch gives a signal when the oil level is low. The system consists of reservoir, electric motor, a rotary positive displacement pump, pressure relief valve, pressure guage, pressure switch, suction strainer, float switch etc. Request a quote